G3YRO's FT101 Notes

Introduction

History          Home         Alignment

These pages refer to the original FT101 series - the FT101 Mk1 & 2, FT101B, FT101E, FT101EE, FT101EX and FT101F.  (but NOT the FT101Z series, which is a completely different rig)

         

The original FT101 series is - in my opinion - one of the best engineered and highest quality Amateur Radio Transceivers ever produced.  It has proper plug-in boards, all readily accessible under a lift-up lid, which makes it very easy to repair.

But there are lots of other excellent design features, like a proper chassis for the Valve stages, British Dial Drives (made by Jackson), Permeabilty Tuning for the RF Circuits, very high-quality Electrolytic Capacitors which never seem to need replacing, and the fact that each individual rig has several components which were selected on test at the factory to calibrate each rig.

It also has a very clever VFO design, with ADJUSTABLE temperature compensation (using a split-stator capacitor with positive and negative temperature coefficient capacitors on each side). With patience, it's possible to adjust this so the rig is virtually drift -free !

None of these features were found on comparable rigs of that era, such as Kenwood's TS520 and TS530.

In fact some Bean Counters at Yaesu must have realised that they were spending far too much money on producing this rig - with the result that the replacement FT101Z series was much more cheaply engineered, and uses cheaper components. (much like Kenwood's TS520 and TS530)

In my experience, they are an incredibly reliable rig. My own FT101E I bought as an ex-demo model when I worked for the UK's Yaesu importer (as their Service Manager). It was my only transmitter for nearly 40 years, but has never had a single fault !  That is in spite of thousands of hours use, including lots of Contests and DX-ing on 160m (worked over 200 countries on 160m using this rig).

This is what the FT101 looks like with the case off:

   

 

History          Alignment         Mods