G3YRO's FT101 Notes

History

Intro         Home         Mods

 


 
The FT101 was launched in 1970.

This is a Mk1 version, which had a silver trim around the front panel.

No 160m, but an AUX band position to add another band, and 11m (CB) band fitted as standard.

But it had a built-in 12V inverter PSU as standard.  


 
The FT101 Mk2 was introduced in 1972.

It retained the silver trim, but there were more circuitry improvements  between the Mk1 and Mk2 than any later versions. This mainly improved the receiver performance.

A popular addition was 160m as standard, so a larger PA coil was fitted.


 
The FT101B was introduced in 1974.

The main changes were a grey trim around the front panel.

However, there were actually very few circuitry changes from the Mk2 - certainly no noticeable improvements.


 
The FT101E was introduced in 1975.

Again, very few circuitry changes from the FT101B, but nicer small switches, plus a useful addition was a separate on/off switch for the Clarifier.

A Speech Processor (RF Clipper) was fitted as standard, although you could buy an FT101EE which came without the Processor.

Another cheaper option was the FT101EX, which also had no 12V Inverter built in.

 

Later versions of the FT101E had various modifications, including a different Processor which had a front-panel control to adjust the output level (around the Clarifier)

Other mods included a different Noise Blanker and Calibrator.

If your FT101E has ALL these mods, it is really an FT101F, although very few rigs were branded as such outside Japan.

 

 

Intro         Alignment         Mods