G3YRO's FT101 Notes

Modifications

Intro          History          Home

GENERAL

The Mk 1 version of the FT-101 had a poor Receiver front end, and several people came out with modifications, including a balanced first mixer circuit.

However, the Mk 2 had a re-designed front end, and to be honest we found that the new version was just as good as a Mk 1 with the modified circuitry. In fact the cross-modulation and overload performance of the Receiver from the Mk 2 onwards is extremely good. So I would not recommend doing any modifications.

Again, an RF Speech Clipper was produced by G3LLL for use on the early versions, but the FT-101E had a built-n RF Clipper as standard.

The one simple Modification I would recommend is replacing the Transmit frequency alignment preset with a multi-turn cermet one. The original skeleton preset is very critical, and moves on its own due to vibration from the PA Fan.

The main PSU Electrolytic Capacitors used by Yaesu in these rigs are extremely high-quality, and I have never found it necessary to replace them.